{"id":2548,"date":"2026-07-30T15:46:59","date_gmt":"2026-07-30T07:46:59","guid":{"rendered":"https:\/\/jeez-semicon.com\/?p=2548"},"modified":"2026-07-30T15:46:59","modified_gmt":"2026-07-30T07:46:59","slug":"two-step-copper-cmp-bulk-cu-vs-barrier-slurry-chemistry-selectivity-endpoint-detection","status":"publish","type":"post","link":"https:\/\/jeez-semicon.com\/zh\/blog\/two-step-copper-cmp-bulk-cu-vs-barrier-slurry-chemistry-selectivity-endpoint-detection\/","title":{"rendered":"Two-Step Copper CMP: Bulk Cu vs. Barrier Slurry \u2014 Chemistry, Selectivity &amp; Endpoint Detection"},"content":{"rendered":"<style>\n@import url('https:\/\/fonts.googleapis.com\/css2?family=Space+Grotesk:wght@400;500;600;700;800&family=Inter:ital,wght@0,300;0,400;0,500;0,600;1,400&display=swap');\n.jz-cl*{box-sizing:border-box}.jz-cl{font-family:'Inter',-apple-system,BlinkMacSystemFont,'Segoe UI',sans-serif;font-size:17px;line-height:1.75;color:#1e293b;max-width:860px;margin:0 auto}\n.jz-cl h1{font-family:'Space Grotesk',sans-serif;font-size:clamp(1.85rem,4.5vw,2.55rem);font-weight:800;color:#0c2340;line-height:1.2;margin:0 0 1.5rem;letter-spacing:-.5px}\n.jz-cl h2{font-family:'Space Grotesk',sans-serif;font-size:clamp(1.18rem,3vw,1.58rem);font-weight:700;color:#0c2340;margin:2.8rem 0 .9rem;padding-left:15px;border-left:4px solid #B87333;line-height:1.3;scroll-margin-top:80px}\n.jz-cl h3{font-family:'Space Grotesk',sans-serif;font-size:1.1rem;font-weight:700;color:#1a3a5c;margin:2rem 0 .55rem}\n.jz-cl h4{font-family:'Space Grotesk',sans-serif;font-size:.96rem;font-weight:700;color:#334155;margin:1.3rem 0 .4rem}\n.jz-cl p{margin:0 0 1.2rem}.jz-cl ul,.jz-cl ol{margin:0 0 1.2rem;padding-left:1.5rem}.jz-cl li{margin-bottom:.45rem;line-height:1.68}\n.jz-cl strong{color:#0c2340;font-weight:600}.jz-cl sub,.jz-cl sup{font-size:.72em}\n.jz-cl a{color:#1d4ed8;text-decoration:underline;text-decoration-color:rgba(29,78,216,.28);text-underline-offset:3px;transition:color .15s}.jz-cl a:hover{color:#B87333;text-decoration-color:#B87333}\n.jz-hero{background:linear-gradient(135deg,#0c2340,#1a4480);border-top:5px solid #B87333;border-radius:14px;padding:28px 34px;color:#fff;margin:0 0 2.4rem;position:relative;overflow:hidden}\n.jz-hero::before{content:'';position:absolute;top:-50px;right:-50px;width:180px;height:180px;border-radius:50%;background:rgba(184,115,51,.08)}\n.jz-hero p{font-size:1.02rem;opacity:.9;margin:0;line-height:1.62;position:relative}.jz-hero strong{color:#f4c07e}\n.jz-toc{background:#f8fafc;border:1px solid #dde4ee;border-left:4px solid #B87333;border-radius:10px;padding:20px 24px 16px;margin:0 0 2.4rem}\n.jz-toc-hd{font-family:'Space Grotesk',sans-serif;font-size:.73rem;font-weight:800;letter-spacing:.12em;text-transform:uppercase;color:#94a3b8;margin:0 0 11px}\n.jz-toc ol{margin:0;padding:0;list-style:none}.jz-toc li{margin-bottom:5px;font-size:.9rem;display:flex;align-items:baseline;gap:6px}\n.jz-toc-n{font-family:'Space Grotesk',sans-serif;font-size:.7rem;font-weight:800;color:#B87333;flex-shrink:0}\n.jz-toc a{color:#334155;text-decoration:none;font-weight:500}.jz-toc a:hover{color:#B87333}\n.jz-pillar-banner{display:flex;align-items:flex-start;gap:11px;background:linear-gradient(90deg,#eff6ff,#fef9f0);border:1px solid #bfdbfe;border-radius:9px;padding:13px 17px;margin:0 0 2rem}\n.jz-pillar-banner p{margin:0;font-size:.9rem;color:#1e40af;line-height:1.5}.jz-pillar-banner a{color:#1e40af;font-weight:600}.jz-pillar-banner a:hover{color:#B87333}\n.jz-callout{border-radius:9px;padding:15px 19px;margin:1.5rem 0;border-left:4px solid}.jz-callout p{margin:0;font-size:.92rem;line-height:1.6}\n.jz-ci{background:#eff6ff;border-color:#3b82f6}.jz-ci strong{color:#1e40af}\n.jz-ct{background:#f0fdf4;border-color:#22c55e}.jz-ct strong{color:#15803d}\n.jz-cc{background:#fef9f0;border-color:#B87333}.jz-cc strong{color:#92400e}\n.jz-deepdive{display:flex;align-items:flex-start;gap:11px;background:linear-gradient(90deg,#eff6ff,#fef9f0);border:1px solid #bfdbfe;border-radius:9px;padding:13px 17px;margin:1.6rem 0}\n.jz-deepdive-ico{font-size:1.05rem;flex-shrink:0;margin-top:2px}.jz-deepdive p{margin:0;font-size:.9rem;color:#1e40af;line-height:1.5}.jz-deepdive a{color:#1e40af;font-weight:600}.jz-deepdive a:hover{color:#B87333}\n.jz-tw{overflow-x:auto;margin:1.5rem 0;border-radius:10px;border:1px solid #e2e8f0}\n.jz-tab{width:100%;border-collapse:collapse;font-size:.88rem}.jz-tab thead{background:#0c2340}\n.jz-tab thead th{padding:11px 15px;text-align:left;color:#fff;font-family:'Space Grotesk',sans-serif;font-weight:600;font-size:.75rem;text-transform:uppercase;letter-spacing:.06em}\n.jz-tab tbody tr{border-bottom:1px solid #f1f5f9}.jz-tab tbody tr:last-child{border-bottom:none}.jz-tab tbody tr:nth-child(even){background:#f8fafc}.jz-tab tbody tr:hover{background:#f0f7ff}\n.jz-tab td{padding:10px 15px;vertical-align:top;color:#334155;line-height:1.5}.jz-tab td:first-child{font-weight:600;color:#0c2340}\n.jz-cards3{display:grid;grid-template-columns:repeat(3,1fr);gap:12px;margin:1.5rem 0}\n.jz-card{background:#fff;border:1px solid #e2e8f0;border-top:3px solid #B87333;border-radius:11px;padding:17px 15px}\n.jz-card-ico{font-size:1.5rem;margin-bottom:7px}.jz-card h4{font-size:.9rem;margin:0 0 5px;color:#0c2340}.jz-card p{font-size:.84rem;color:#64748b;margin:0;line-height:1.5}\n.jz-steps{display:flex;flex-direction:column;gap:15px;margin:1.5rem 0}\n.jz-step{display:flex;gap:14px;align-items:flex-start}\n.jz-step-n{flex-shrink:0;width:36px;height:36px;border-radius:50%;background:linear-gradient(135deg,#0c2340,#1a4480);color:#f4c07e;font-family:'Space Grotesk',sans-serif;font-size:.8rem;font-weight:800;display:flex;align-items:center;justify-content:center;margin-top:2px}\n.jz-step-b h4{margin:0 0 3px;font-size:.96rem;color:#0c2340}.jz-step-b p{margin:0;font-size:.9rem;color:#475569;line-height:1.58}\n.jz-related{background:#f8fafc;border:1px solid #e2e8f0;border-radius:10px;padding:17px 21px;margin:2rem 0}\n.jz-related h3{font-size:.75rem;font-weight:800;letter-spacing:.1em;text-transform:uppercase;color:#94a3b8;margin:0 0 10px}\n.jz-related ul{margin:0;padding:0;list-style:none}.jz-related li{margin-bottom:7px;font-size:.91rem}.jz-related li::before{content:'\u2192 ';color:#B87333;font-weight:700}\n.jz-cta{background:linear-gradient(135deg,#0c2340,#1a4480);border-top:5px solid #B87333;border-radius:14px;padding:36px 42px;text-align:center;color:#fff;margin:3.5rem 0 2rem;position:relative;overflow:hidden}\n.jz-cta::before{content:'';position:absolute;top:-70px;right:-70px;width:250px;height:250px;border-radius:50%;background:rgba(184,115,51,.06)}\n.jz-cta h2{font-family:'Space Grotesk',sans-serif;font-size:clamp(1.28rem,3vw,1.62rem);font-weight:800;color:#fff;margin:0 0 10px;border:none;padding:0;position:relative}\n.jz-cta p{opacity:.85;font-size:.96rem;margin:0 0 24px;position:relative}\n.jz-cta-btn{display:inline-block;background:#B87333;color:#fff;text-decoration:none;font-family:'Space Grotesk',sans-serif;font-weight:700;font-size:.97rem;padding:13px 32px;border-radius:8px;transition:background .2s,transform .15s;position:relative}\n.jz-cta-btn:hover{background:#9a6228;color:#fff;text-decoration:none;transform:translateY(-2px)}\n.jz-faq{border-top:1px solid #e2e8f0;margin:.8rem 0}.jz-faq-item{border-bottom:1px solid #f1f5f9;padding:1.15rem 0}\n.jz-faq-q{font-family:'Space Grotesk',sans-serif;font-weight:700;color:#0c2340;font-size:.96rem;margin:0 0 5px}\n.jz-faq-a{font-size:.91rem;color:#475569;margin:0;line-height:1.65}\n.jz-hr{border:none;border-top:1px solid #e2e8f0;margin:2.5rem 0}\n@media(max-width:640px){.jz-cl h1{font-size:1.7rem}.jz-cl h2{font-size:1.15rem}.jz-hero{padding:20px 18px}.jz-cards3{grid-template-columns:1fr}.jz-cta{padding:26px 20px}}\n<\/style>\n\n<div class=\"jz-cl\">\n\n<div class=\"jz-pillar-banner\">\n  <span>\ud83d\udcda<\/span>\n  <p>Part of the <strong>\u94dc CMP \u6ce5\u6d46<\/strong> knowledge series. For the complete process overview, see the <a href=\"https:\/\/jeez-semicon.com\/zh\/blog\/Copper-CMP-Slurry-Complete-Guide-Chemistry-Process-Optimization-Advanced-Node-Applications\/\" target=\"_blank\" rel=\"noopener noreferrer\">Copper CMP Slurry: Complete Guide<\/a>.<\/p>\n<\/div>\n\n\n<div class=\"jz-hero\">\n  <p>The two-step copper CMP process is the universal architecture for copper interconnect planarization in production semiconductor manufacturing. <strong>Step 1<\/strong> rapidly removes the bulk copper overburden; <strong>Step 2<\/strong> precisely clears the barrier metal while stopping on the ILD. These two objectives demand fundamentally different slurry chemistries, polishing pressures, and endpoint detection strategies \u2014 and correctly integrating both steps is critical to achieving low dishing, low erosion, and complete barrier clearance simultaneously. This article explains the chemistry, selectivity requirements, and endpoint detection methods for each step, with practical guidance for process integration.<\/p>\n<\/div>\n\n<div class=\"jz-toc\">\n  <p class=\"jz-toc-hd\">\u76ee\u5f55<\/p>\n  <ol>\n    <li><span class=\"jz-toc-n\">01.<\/span><a href=\"#why-two\">Why Two Steps Are Necessary<\/a><\/li>\n    <li><span class=\"jz-toc-n\">02.<\/span><a href=\"#step1\">\u6b65\u9aa4 1\uff1a\u5927\u91cf\u9664\u94dc<\/a><\/li>\n    <li><span class=\"jz-toc-n\">03.<\/span><a href=\"#step2\">Step 2: Barrier Clearing &amp; Final Planarization<\/a><\/li>\n    <li><span class=\"jz-toc-n\">04.<\/span><a href=\"#step3\">Optional Step 3: Buff Polish<\/a><\/li>\n    <li><span class=\"jz-toc-n\">05.<\/span><a href=\"#endpoint\">Endpoint Detection Methods<\/a><\/li>\n    <li><span class=\"jz-toc-n\">06.<\/span><a href=\"#window\">Process Window Management &amp; APC Integration<\/a><\/li>\n    <li><span class=\"jz-toc-n\">07.<\/span><a href=\"#faq\">\u5e38\u89c1\u95ee\u9898<\/a><\/li>\n  <\/ol>\n<\/div>\n\n<h2 id=\"why-two\">1. Why Two Steps Are Necessary<\/h2>\n<p>A single copper CMP slurry optimized for bulk copper removal is fundamentally incompatible with the requirements for precise barrier metal clearing. This incompatibility arises from three independent constraints that cannot be simultaneously satisfied in one formulation:<\/p>\n<ul>\n  <li><strong>Removal rate vs. selectivity:<\/strong> High-rate Step 1 slurries use aggressive oxidizer concentrations and hard abrasives to remove 400\u2013800 nm of copper overburden quickly \u2014 but these same conditions also remove ILD material rapidly, producing severe erosion during Step 2&#8217;s barrier-clearing phase. A Step 2 process using Step 1 chemistry would erode the ILD by 50\u2013100 nm before clearing barrier in dense array regions.<\/li>\n  <li><strong>Barrier attack:<\/strong> The barrier metals \u2014 tantalum (Ta), tantalum nitride (TaN), cobalt (Co), or ruthenium (Ru) \u2014 are significantly harder and more chemically resistant than copper. Step 1 chemistry, tuned to dissolve copper rapidly, has little to no effectiveness on Ta or TaN. Attempting to clear barrier with Step 1 slurry requires extremely long polishing that massively over-polishes the copper features.<\/li>\n  <li><strong>Endpoint detection compatibility:<\/strong> The endpoint signal for &#8220;stop at the copper-barrier interface&#8221; (Step 1 endpoint) is physically different from the signal for &#8220;barrier is cleared, stop on ILD&#8221; (Step 2 endpoint). Two separate detection events require two separate process steps with distinct monitoring configurations.<\/li>\n<\/ul>\n<p>The two-step architecture solves these incompatibilities cleanly: Step 1 handles high-rate copper removal with no concern for ILD erosion (there is no exposed ILD yet), and Step 2 handles barrier clearing with a slurry optimized for selectivity and low mechanical stress.<\/p>\n\n<h2 id=\"step1\">2. Step 1: Bulk Copper Removal<\/h2>\n\n<h3>Step 1 Chemistry and Objectives<\/h3>\n<p>Step 1 must remove 400\u2013800 nm of electroplated copper overburden as rapidly as possible while maintaining WIWNU below 5% across the 300 mm wafer. The stopping condition for Step 1 is not the barrier metal surface \u2014 it is a target remaining copper thickness of 20\u201350 nm above the barrier, leaving a thin, uniform copper residual that Step 2 can clear precisely without introducing planarity disturbance.<\/p>\n\n<div class=\"jz-tw\">\n  <table class=\"jz-tab\">\n    <thead><tr><th>\u53c2\u6570<\/th><th>Step 1 Target<\/th><th>\u7406\u7531<\/th><\/tr><\/thead>\n    <tbody>\n      <tr><td>Cu Removal Rate<\/td><td>\u2265300 nm\/min (at 2\u20133 psi)<\/td><td>Minimize polishing time for throughput<\/td><\/tr>\n      <tr><td>Abrasive Type<\/td><td>Alumina or fumed silica<\/td><td>High hardness for aggressive Cu removal<\/td><\/tr>\n      <tr><td>H\u2082O\u2082 Concentration<\/td><td>2\u20135 wt%<\/td><td>Rapid Cu surface oxidation<\/td><\/tr>\n      <tr><td>WIWNU (1\u03c3)<\/td><td>&lt;5%<\/td><td>Uniform residual Cu for Step 2 entry<\/td><\/tr>\n      <tr><td>Step 1 End Point<\/td><td>20\u201350 nm Cu above barrier<\/td><td>Prevent early barrier exposure; enable Step 2 uniformity<\/td><\/tr>\n      <tr><td>Defect Density<\/td><td>&lt;50\/cm\u00b2 (0.1 \u00b5m+)<\/td><td>Step 2 will partially clean; some step 1 defects tolerated<\/td><\/tr>\n    <\/tbody>\n  <\/table>\n<\/div>\n\n<p>Step 1 slurry abrasives are typically fumed or colloidal alumina (20\u201380 nm primary particle size) for maximum removal rate. At advanced nodes where ELK dielectric stacks limit pressure to &lt;1 psi, engineered colloidal silica with chemically enhanced formulations (higher H\u2082O\u2082, optimized glycine loading) is increasingly used to compensate for the mechanical throughput limitation. JEEZ&#8217;s CuB series covers this full range with alumina-based formulations for conventional nodes and colloidal-silica enhanced variants for ELK-compatible Step 1 at advanced nodes.<\/p>\n\n<h3>Step 1 Endpoint: Stopping at the Right Thickness<\/h3>\n<p>Stopping Step 1 with 20\u201350 nm of uniform copper remaining is critical. Too much residual copper (>80 nm) creates a Step 2 entry condition that is too thick for the gentler Step 2 chemistry to clear in reasonable polishing time, risking dishing on wide features from extended Step 2 polishing. Too little residual copper (&lt;10 nm or direct barrier exposure) creates a kinetic discontinuity that disturbs planarity and risks ILD damage in Step 2.<\/p>\n<p><strong>Eddy-current sensing<\/strong> is the preferred Step 1 endpoint detection method: non-contact electromagnetic induction probes embedded in the platen measure copper film sheet resistance in real time through the pad, providing a thickness reading that directly tracks the approach to the 20\u201350 nm target. Closed-loop APC systems adjust Step 1 polishing time run-to-run based on the measured endpoint time from the previous wafer, compensating for lot-to-lot ECD thickness variation.<\/p>\n\n<h2 id=\"step2\">3. Step 2: Barrier Clearing &amp; Final Planarization<\/h2>\n\n<h3>Step 2 Chemistry Requirements<\/h3>\n<p>Step 2 must simultaneously accomplish three tasks that require carefully balanced competing chemistry: clear the thin (~20\u201350 nm) copper residual from Step 1, remove the barrier metal (Ta\/TaN or Co\/Ru) that now separates the copper lines, and stop on the ILD without excessive erosion. The key formulation requirements are:<\/p>\n\n<div class=\"jz-cards3\">\n  <div class=\"jz-card\">\n    <div class=\"jz-card-ico\">\ud83c\udfaf<\/div>\n    <h4>High Cu:ILD Selectivity<\/h4>\n    <p>Copper removal rate should far exceed ILD removal rate \u2014 ideally &gt;50:1 \u2014 to limit dielectric erosion in dense metal arrays during the barrier clearing period.<\/p>\n  <\/div>\n  <div class=\"jz-card\">\n    <div class=\"jz-card-ico\">\u26a1<\/div>\n    <h4>Adequate Barrier Rate<\/h4>\n    <p>Barrier (Ta, TaN, Co, Ru) removal rate of 10\u201330 nm\/min is needed for economically viable Step 2 cycle time without excessive ILD attack during barrier clearing.<\/p>\n  <\/div>\n  <div class=\"jz-card\">\n    <div class=\"jz-card-ico\">\ud83d\udee1\ufe0f<\/div>\n    <h4>Low Static Etch Rate<\/h4>\n    <p>SER &lt;0.5 nm\/min to protect copper in completed trench features from dishing during the longer Step 2 polishing time required for barrier clearing.<\/p>\n  <\/div>\n<\/div>\n\n<p>Step 2 slurries universally use <strong>colloidal silica abrasives<\/strong> (D50 60\u2013120 nm) rather than alumina, for their lower hardness and higher surface selectivity. The pH is shifted toward near-neutral (6\u20138) compared to Step 1 to improve both Cu:ILD selectivity and barrier metal compatibility. BTA concentration is typically reduced relative to Step 1 to allow adequate barrier attack, while oxidizer concentration is modulated to provide copper and barrier oxidation without ILD attack.<\/p>\n\n<h3>Ta\/TaN vs. Co\/Ru Barrier Compatibility<\/h3>\n<p>Standard Step 2 formulations are optimized for Ta\/TaN barrier systems. Cobalt (Co) and ruthenium (Ru) liners \u2014 increasingly used at 7 nm and below \u2014 have very different electrochemical behavior: they corrode aggressively in acidic oxidizing environments and form galvanic couples with copper that accelerate liner dissolution. JEEZ CuS barrier slurries include dedicated Co\/Ru-compatible variants with near-neutral pH formulations and Co\/Ru-specific corrosion inhibitor packages.<\/p>\n\n<div class=\"jz-deepdive\">\n  <span class=\"jz-deepdive-ico\">\ud83d\udcd6<\/span>\n  <p>For a detailed treatment of galvanic corrosion at Cu\/Co and Cu\/Ru interfaces, see: <a href=\"https:\/\/jeez-semicon.com\/zh\/blog\/Corrosion-Inhibitors-in-Copper-CMP-Slurry-BTA-Mechanism-Galvanic-Risks-Alternatives\/\" target=\"_blank\" rel=\"noopener noreferrer\">Corrosion Inhibitors in Copper CMP Slurry: BTA Mechanism, Galvanic Risks &amp; Alternatives<\/a>.<\/p>\n<\/div>\n\n<h2 id=\"step3\">4. Optional Step 3: Buff Polish<\/h2>\n<p>A third polishing step \u2014 a light &#8220;buff&#8221; using dilute colloidal silica or an abrasive-free colloidal solution \u2014 is increasingly used in advanced-node logic (7 nm and below) and leading-edge DRAM processes. Step 3 serves two functions:<\/p>\n<ul>\n  <li><strong>Planarity restoration:<\/strong> Step 2 can introduce local topographic non-uniformity at the transition from copper-rich to copper-lean regions. A brief Step 3 buff on a soft pad with high Cu:ILD selectivity (often &gt;200:1) selectively removes residual topographic peaks without affecting the now-planar ILD surface below.<\/li>\n  <li><strong>Surface quality improvement:<\/strong> Step 3 removes residual Step 2 BTA-Cu surface film, reduces surface roughness to Ra &lt;0.3 nm rms, and reduces Step 2 scratch defect count by light mechanical re-polishing at very low pressure (&lt;0.5 psi).<\/li>\n<\/ul>\n<p>Step 3 is not universal \u2014 the additional cycle time and tool footprint cost means it is typically reserved for the most critical metal levels (M1, M2) where planarity and surface quality specifications are tightest.<\/p>\n\n<h2 id=\"endpoint\">5. Endpoint Detection Methods<\/h2>\n<p>Endpoint detection is the technical foundation of the two-step copper CMP process. Each step requires a different endpoint event to be detected reliably at production throughput with millisecond-level temporal resolution.<\/p>\n\n<div class=\"jz-steps\">\n  <div class=\"jz-step\">\n    <div class=\"jz-step-n\">01<\/div>\n    <div class=\"jz-step-b\">\n      <h4>Eddy-Current Sensing (Step 1 Thickness Control)<\/h4>\n      <p>Electromagnetic induction coils in the platen generate an alternating field that induces eddy currents in the conducting copper film. The impedance change of the coil circuit correlates with copper film sheet resistance and therefore thickness. This provides real-time thickness tracking with ~1 nm resolution, enabling closed-loop Step 1 stop-on-thickness control. Eddy-current endpoint is the most accurate and APC-friendly method for Step 1 control at advanced nodes.<\/p>\n    <\/div>\n  <\/div>\n  <div class=\"jz-step\">\n    <div class=\"jz-step-n\">02<\/div>\n    <div class=\"jz-step-b\">\n      <h4>In-Situ Optical Reflectance (Step 1\/Step 2 Transition)<\/h4>\n      <p>A laser or broadband light source illuminates the wafer through a window in the platen during polishing. As the copper film thins toward the barrier and then clears, the reflectance spectrum changes detectably \u2014 copper has a characteristic reflectance peak at ~570 nm that diminishes as the surface transitions to the lower-reflectance barrier metal. Optical reflectance monitoring (ORM\/ISRM) provides a clear endpoint signal at the Step 1\/Step 2 transition and is useful as a backup to eddy-current sensing or as the primary method where eddy-current is unavailable.<\/p>\n    <\/div>\n  <\/div>\n  <div class=\"jz-step\">\n    <div class=\"jz-step-n\">03<\/div>\n    <div class=\"jz-step-b\">\n      <h4>Motor Current \/ Friction Monitoring (Step 2 Barrier Endpoint)<\/h4>\n      <p>The torque required to rotate the polishing platen changes measurably when the surface composition transitions from copper (low friction with the pad) to barrier metal (higher friction, particularly for hard Ta and TaN) and then to ILD oxide (different friction coefficient again). Motor current monitoring provides a clear endpoint signal at the barrier clearance event \u2014 the moment when all barrier metal on the wafer has been removed and the pad is in contact with ILD only. This is the most widely used Step 2 endpoint method due to its simplicity and the clarity of the friction signal at the barrier-to-ILD transition.<\/p>\n    <\/div>\n  <\/div>\n<\/div>\n\n<h2 id=\"window\">6. Process Window Management &amp; APC Integration<\/h2>\n<p>Managing the process window across a two-step sequence \u2014 ensuring that Step 1 consistently delivers the 20\u201350 nm copper residual target, and that Step 2 endpoint occurs within a tight over-polish window \u2014 requires robust APC integration.<\/p>\n<p>A production copper CMP APC system typically implements:<\/p>\n<ul>\n  <li><strong>Run-to-run Step 1 time adjustment:<\/strong> Using the measured eddy-current endpoint time from the previous wafer, APC adjusts the Step 1 polishing time for the current wafer to hit the target residual copper thickness, compensating for lot-to-lot ECD thickness variation (typically \u00b15\u201315% of nominal).<\/li>\n  <li><strong>Step 2 over-polish time control:<\/strong> The Step 2 motor current endpoint time is measured per wafer, and the over-polish time (fixed seconds after endpoint detection) is validated against the target dishing budget. If the endpoint signal quality degrades (e.g., from pad glazing), APC flags the run for engineering review.<\/li>\n  <li><strong>Pad-aging compensation:<\/strong> Both Step 1 removal rate and Step 2 barrier clearing rate decrease as the pad ages. APC systems model pad-age-dependent removal rate curves and automatically compensate polishing time to maintain endpoint targets across the full pad lifetime (typically 300\u2013600 wafers).<\/li>\n<\/ul>\n<p>JEEZ application engineers assist customers in calibrating APC models for specific CuB\/CuS slurry combinations \u2014 providing removal rate characterization data, pad aging curves, and endpoint signal characterization across the full slurry qualification matrix.<\/p>\n\n<hr class=\"jz-hr\">\n\n<h2 id=\"faq\">7. Frequently Asked Questions<\/h2>\n<div class=\"jz-faq\">\n  <div class=\"jz-faq-item\">\n    <p class=\"jz-faq-q\">Why can&#8217;t the same slurry be used for both Step 1 and Step 2?<\/p>\n    <p class=\"jz-faq-a\">Step 1 requires high removal rate, aggressive abrasives, and high oxidizer loading \u2014 conditions that would cause severe ILD erosion if continued through barrier clearing. Step 2 requires high Cu:ILD selectivity, gentler abrasives, and near-neutral pH to clear barrier without attacking the ILD \u2014 conditions that are too gentle and slow for efficient bulk copper removal in Step 1. No single formulation can simultaneously satisfy both sets of requirements at production-viable process conditions.<\/p>\n  <\/div>\n  <div class=\"jz-faq-item\">\n    <p class=\"jz-faq-q\">What happens if Step 1 exposes the barrier metal prematurely?<\/p>\n    <p class=\"jz-faq-a\">Premature barrier exposure \u2014 polishing Step 1 past the 20\u201350 nm copper residual target \u2014 creates two problems. First, the sudden change in polishing dynamics at the copper-to-barrier transition (barrier is much harder and less polishable than copper) creates a kinetic &#8220;shock&#8221; that disturbs planarity, leaving residual copper in some regions and over-exposing ILD in others. Second, the exposed barrier contacts the aggressive Step 1 chemistry before Step 2 begins, potentially causing barrier corrosion or galvanic attack at the Cu\/barrier interface. Tight endpoint control is the primary mitigation.<\/p>\n  <\/div>\n  <div class=\"jz-faq-item\">\n    <p class=\"jz-faq-q\">Is a three-step Cu CMP process common in production?<\/p>\n    <p class=\"jz-faq-a\">A third buff step is increasingly common in advanced-node logic (7 nm and below) and leading DRAM production, but is not universally used. It is typically reserved for the lowest metal levels (M1, M2) where planarity and surface quality specifications are most stringent. At older nodes (28 nm and above) or less critical metal levels, a two-step process is generally sufficient and the additional cost of a third step is not justified by the yield benefit.<\/p>\n  <\/div>\n  <div class=\"jz-faq-item\">\n    <p class=\"jz-faq-q\">How does the transition from Ta\/TaN to Co\/Ru barriers affect two-step slurry selection?<\/p>\n    <p class=\"jz-faq-a\">Transitioning to Co or Ru liners requires a reformulated Step 2 slurry. Co and Ru are more susceptible to corrosion than Ta in oxidizing acidic conditions, and they form galvanic couples with copper that accelerate liner dissolution. Co\/Ru-compatible Step 2 slurries use near-neutral pH (6.5\u20137.5), moderated H\u2082O\u2082 concentration, and Co\/Ru-specific corrosion inhibitor packages. The Step 1 slurry can typically remain unchanged if Co\/Ru is used only as a liner (not exposed during bulk Cu removal), but must be re-evaluated if the liner is exposed at any point during Step 1.<\/p>\n  <\/div>\n<\/div>\n\n<div class=\"jz-related\">\n  <h3>Related Articles in This Series<\/h3>\n  <ul>\n    <li><a href=\"https:\/\/jeez-semicon.com\/zh\/blog\/Copper-CMP-Removal-Rate-Preston-Equation-Key-Variables-Practical-Optimization\/\" target=\"_blank\" rel=\"noopener noreferrer\">Copper CMP Removal Rate: Preston Equation, Key Variables &amp; Practical Optimization<\/a><\/li>\n    <li><a href=\"https:\/\/jeez-semicon.com\/zh\/blog\/Corrosion-Inhibitors-in-Copper-CMP-Slurry-BTA-Mechanism-Galvanic-Risks-Alternatives\/\" target=\"_blank\" rel=\"noopener noreferrer\">Corrosion Inhibitors in Copper CMP Slurry: BTA Mechanism, Galvanic Risks &amp; Alternatives<\/a><\/li>\n    <li><a href=\"https:\/\/jeez-semicon.com\/zh\/blog\/Dishing-and-Erosion-in-Copper-CMP-Causes-Pattern-Density-Effects-Mitigation\/\" target=\"_blank\" rel=\"noopener noreferrer\">Dishing and Erosion in Copper CMP: Causes, Pattern Density Effects &amp; Mitigation<\/a><\/li>\n    <li><a href=\"https:\/\/jeez-semicon.com\/zh\/blog\/Copper-CMP-Slurry-Complete-Guide-Chemistry-Process-Optimization-Advanced-Node-Applications\/\" target=\"_blank\" rel=\"noopener noreferrer\">Copper CMP Slurry: Complete Guide (Pillar)<\/a><\/li>\n  <\/ul>\n<\/div>\n\n<div class=\"jz-cta\">\n  <h2>Optimizing Your Two-Step Copper CMP Process?<\/h2>\n  <p>Jizhi Electronic Technology Co., Ltd. (JEEZ) supplies matched CuB + CuS slurry pairs for the full two-step copper CMP process, with Co\/Ru-compatible variants for advanced-node barrier integration. Our application engineering team provides process window characterization and APC model support.<\/p>\n  <a href=\"https:\/\/jeez-semicon.com\/zh\/contact\/\" target=\"_blank\" rel=\"noopener noreferrer\" class=\"jz-cta-btn\">Contact JEEZ Application Engineering \u2192<\/a>\n<\/div>\n\n<\/div>\n\n<script type=\"application\/ld+json\">\n{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Why can't the same slurry be used for both Step 1 and Step 2 of copper CMP?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Step 1 needs high removal rate and aggressive chemistry that would cause severe ILD erosion during barrier clearing. Step 2 needs high Cu:ILD selectivity and gentle abrasives that are too slow for bulk copper removal. No single formulation can satisfy both requirements simultaneously at production-viable conditions.\"}},{\"@type\":\"Question\",\"name\":\"What happens if Step 1 exposes the barrier metal prematurely in copper CMP?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Premature barrier exposure creates kinetic disruption at the Cu-to-barrier transition, disturbing planarity and leaving residual copper in some regions while over-exposing ILD in others. The exposed barrier also contacts aggressive Step 1 chemistry before Step 2 begins, risking corrosion or galvanic attack at the Cu\/barrier interface.\"}},{\"@type\":\"Question\",\"name\":\"Is a three-step copper CMP process common in production?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A third buff step is increasingly used in advanced-node logic (7 nm and below) and leading DRAM production for the lowest metal levels where planarity and surface quality specifications are most stringent. At 28 nm and above, a two-step process is generally sufficient.\"}},{\"@type\":\"Question\",\"name\":\"How does transitioning to Co\/Ru barriers affect two-step slurry selection?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Co and Ru require a reformulated Step 2 slurry with near-neutral pH (6.5-7.5), moderated H2O2, and Co\/Ru-specific corrosion inhibitors to prevent liner corrosion and galvanic attack at the Cu\/liner interface. Step 1 slurry can typically remain unchanged if Co\/Ru is not exposed during bulk Cu removal.\"}}]}\n<\/script>","protected":false},"excerpt":{"rendered":"<p>\ud83d\udcda Part of the Copper CMP Slurry knowledge series. For the complete process overview, see the Copper CMP Slurry: Complete Guide. The two-step copper CMP process is the universal architecture  &#8230;<\/p>","protected":false},"author":1,"featured_media":2550,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[9,59],"tags":[],"class_list":["post-2548","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","category-industry"],"acf":[],"_links":{"self":[{"href":"https:\/\/jeez-semicon.com\/zh\/wp-json\/wp\/v2\/posts\/2548","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jeez-semicon.com\/zh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/jeez-semicon.com\/zh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/jeez-semicon.com\/zh\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/jeez-semicon.com\/zh\/wp-json\/wp\/v2\/comments?post=2548"}],"version-history":[{"count":2,"href":"https:\/\/jeez-semicon.com\/zh\/wp-json\/wp\/v2\/posts\/2548\/revisions"}],"predecessor-version":[{"id":2551,"href":"https:\/\/jeez-semicon.com\/zh\/wp-json\/wp\/v2\/posts\/2548\/revisions\/2551"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/jeez-semicon.com\/zh\/wp-json\/wp\/v2\/media\/2550"}],"wp:attachment":[{"href":"https:\/\/jeez-semicon.com\/zh\/wp-json\/wp\/v2\/media?parent=2548"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/jeez-semicon.com\/zh\/wp-json\/wp\/v2\/categories?post=2548"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/jeez-semicon.com\/zh\/wp-json\/wp\/v2\/tags?post=2548"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}