Quelle est la différence essentielle entre un tampon de finition CMP et des tampons de polissage grossier/intermédiaire ? Comment les choisir ?
CMP finishing pads (Final Pads) are specifically designed for ultra-precise surface finishing. Their key characteristics include:
-
Finer surface structure: Porosity < 10% with higher groove density for nanoscale material removal control (< 50 nm/min)
-
Optimized elastic modulus (typically < 500 MPa): Buffers pressure through flexible contact to avoid surface damage
-
Enhanced chemical compatibility: Surface-treated for alkaline/oxidative slurries
Selection Guide: -
Rough polishing stage: Use high-hardness pads (> 1 GPa) for rapid removal
-
Finishing stage: Must use finishing pads to ensure surface roughness Ra < 0.5 nm
Jizhi Electronics offers complete pad portfolio solutions with intelligent process parameter matching.
